The Pacemaker Amp: Control Panel

The V-2 Pacemaker (tube model) control panel





The V1022 Pacemaker (later solid state model with E-Tuner) control panel


The solid state and tube versions of the Vox Pacemaker had similar control panels and features. The V-2 tube Pacemaker is shown in the upper picture, the solid state Pacemaker control panel is shown beneath the tube model.

The Pacemaker amp had a single channel with three 1/4" inputs and tremolo. The tube Pacemaker differed by adding a standby provision to the power switch and a rectangular frame around each of the control names on the upper control panel. Later versions of the solid state Pacemaker amp added an "E-Tuner" function to the lower control panel of the amp.






2_Footer

.................



The VOX Showroom!


Photos and editorial content courtesy Gary Hahlbeck, North Coast Music


Any and all material presented herein is protected by Copyright.
© 1998 - 2017 The Vox Showroom and North Coast Music, all rights reserved

The images and editorial content in this web site may not be copied or reproduced
in online auction sites such as eBay and Craig's List. Sellers may provide a link
to the Vox Showroom web site if they wish to refer to this copyrighted material.


URL: http://www.voxshowroom.com/us/amp/paceCP.html