Pictured above is the AC-50's power section showing the on/off switch, the fuse holder, the power indicator light and the voltage selector. The voltage selector pictured here is a later version. Earlier versions were simply a plug selector similar to Marshall amplifiers in the seventies. All properly setup tube VOX's can run safely with the voltage selector in the 160 voltage position. This runs the tubes a little hotter and gives an overdriven sound at lower volumes.

Contents | Equipment | Classifieds | VOXbbc | Search | Vox Catalog Archive | Vox Owner's Manuals | Links | What's New NEW! - My 1960's Vox Band Photos and editorial content courtesy Gary Hahlbeck, North Coast Music Any and all material herein is protected by Copyright © 1998 - 2012 North Coast Music, all rights reserved The images and editorial content in this web site may not be copied or reproduced to online auction sites such as eBay and Craig's List. Sellers may provide a link to the Vox Showroom web site if they wish to refer to this copyrighted material