AC-50 Super Twin "Large Box" Chrome Trolley - Complete Set - Side stands plus double bar for amp head to rest on. For 33" cabinet widths. Includes hand wheels, handwheel mounting plates, friction washers, and casters. Does not include cabinet mounting screws. These vary from cabinet to cabinet, you will need to purchase these locally at a hardware store. No template for drillling your cabinet for swivel mounts is included. To assist you in mounting the stand, the dimension from the center of the stand mount to the top outer edge of the cabinet should be 9.5" on an AC-50 cabinet. Most Vox AC-50 cabs already have the mounting holes predrilled.

Price: $389.00 USD each
Continental US Shipping: $28 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-094
Order Quantity:


Having trouble with the shopping cart? Click here

All of these Thomas Vox amp heads have a threaded "tee nut" on the inside lower panel of their cabinets that was designed to accept this steel clamp and wingbolt. Installable in under 15 seconds, this accurate reproduction of the original Vox clamp will firmly secure your precious vintage Thomas Vox amp head to the stand so that it cannot fall off the trolley. You need make no modifications to a Thomas amp head to use this clamp.

Like the originals, the head clamp is finished in a dark gray/black zinc oxide finish that will not rust.

This head clamp will also work with any of the North Coast Music trolleys for Vox amps, such as the Beatle, Royal Guardsman, and Buckingham.

If you have a Vox AD120VTH or AD60VTH head that you place on a Beatle, Guardsman, Buckingham, or Westminster stand, you may request below, at no additional charge, an easy to install kit to install the tee nut into the bottom of your head cabinet. The installation of this "tee nut" does not require you to take apart your amp head or invalidate your warranty.

This clamp may also be used with the AC-30CCH "Custom Classic" head with a North Coast Music chrome swivel trolley, but you must first remove the chassis and reverb pan to install the tee nut in the bottom of the head cab.

If you have previously purchased a Super B or New Guardsman, you also have the option to install this bracket into your amp, again, not requring you to take apart your amplifier top.

This clamp will not work with the Berkeley, Cambridge, Pathfinder, or Pacemaker series of amps.

NCM-458 - Thomas Vox "Head to Trolley" Clamp
Price: $23.95 USD each

Select your desired usage from the two choices below:
For use with Thomas Vox Super Beatle, Beatle, Royal Guardsman, Buckingham, Westminster, and Series 90 amp heads with Vox or North Coast Music amp trolleys
For use with modern Vox AD120VTH, AD60VTH, or AC-30CCH amp heads with Vox or North Coast Music trolleys (includes tee nut and instructions for drilling and mounting)

US Shipping: $2.00
Alaska, Hawaii and International Shipping: Fax or eMail
Part #: NCM-458

Order Quantity:



Having trouble with the shopping cart? Click here