NCM-019
| "One Pin" Corner for Vox Amplifiers - Manufactured by and available from North Coast Music exclusively. The exact corner from Vox in the early to mid sixties, both JMI and Thomas. North Coast actually found the original plastic injection mold, which was in poor repair, and restored the mold to original condition.
These corners were also used by Thomas Vox in America on all of the angled corners of the trapezoid head cabs, such as the Super Beatle, Royal Guardsman, and Buckingham as well. The corners are flexible and form to fit the angles perfectly.
These corners accommodate a 3/8" radius on the front edge, and a 3/4" radius on the front to rear edges of the amp cabinet.
Mounting screws and front pins are not included, but are offered separately by North Coast Music, see NCM-123 and NCM-451 below.
Price: $3.75 USD each
Continental US Shipping: $.35 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Order Quantity: 
Having trouble with the shopping cart? Click here
|
NCM-020
| "Two Pin" Corner for Vox Amplifiers - Manufactured by North Coast exclusively, made from the original 1960s era injection mold. This two pin corner is found on most Vox amps starting in 1966 through 2004, excepting US Thomas Vox amps. This is the exact corner used on the Vox AC-30TB/TBX and AC-15TB/TBX. In fact, North Coast Music supplied these to Vox for the production of these amps!
These corners accommodate a 3/8" radius on the front edge, and a 3/4" radius on the front to rear edges of the amp cabinet.
Mounting screws and front pins are not included, but are offered separately by North Coast Music, see NCM-123 and NCM-451 below.
Price: $3.75 USD each
Continental US Shipping: $.35 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-020
Order Quantity:
Having trouble with the shopping cart? Click here
|
NCM-021
| "Modern Two Pin" Genuine Vox Corner - As used on many current amplifiers produced by Vox. These are the corners Vox mounts on earlier Valvetronix amps, all the VR amps, and all the AC-30 Custom Classic (CC) and AC15CC amps. This corner does not fit well on vintage Vox amps, I recommend NCM-019 and NCM-020 above for older Vox amps. The NCM-021 corner accommodates a 3/8" radius on all edges. Mounting screws and pins are included.
Price: $5.00 USD each
Continental US Shipping: $.30 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-021
Order Quantity:
Having trouble with the shopping cart? Click here
|
NCM-018
| "Modern Valvetronix" Genuine Vox Corner - As used on recent Valvetronix amp production from Vox. This corner is made of black plastiic and features a matte (not shiny) finish. These corners have no raised detailing or ridges. This corner uses no fasteners on the front face, it is held down solely by two screws that go into the sides of the amplifier (screws are included). These screws are currently used on the production of the Vox DA15, AD15VT, AD30VT, AD50VT, AD50VT-212, AD100VT, and AD100VTH amplifiers. This corner does not fit well on vintage Vox amps. I recommend NCM-019 and NCM-020 above for older Vox amps. The NCM-018 corner accommodates a 3/8" radius on all edges. Price: $5.00 USD each
Continental US Shipping: $.30 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-018
Order Quantity:
Having trouble with the shopping cart? Click here
|
NCM-123
| Black Flat Head Philips Corner Screws for Vox Corners - Ten to a package.
Price: $1.75 USD per package
Continental US Shipping: $.70 USD per package
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-123
Order Quantity:
Having trouble with the shopping cart? Click here
|
| No picture available |
Black Nails (Pins) for the front face of Vox Corners - Eight to a package.
Price: $1.25 USD per package
Continental US Shipping: $.25 USD per package
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-451
Order Quantity:
Having trouble with the shopping cart? Click here
|
