North Coast Music

North Coast Music was the largest single location VOX dealer in the US for the years 2002, 2003, 2004, 2005, 2006...and 2007!


Cabinets - Fawn Vox AC-30 Combo Cabs for JMI Chassis

Need help ordering online? Click here for complete instructions.



Limited Edition Fawn AC-30 Combo Cabinets - An authentic reproduction of the JMI AC-30 combo enclosure, now manufactured excusively by North Coast Music and authorized and licensed by Vox UK.

Protect that original valuable JMI era amp cabinet, but still use your vintage JMI Vox AC-30 on a gig with this fawn combo cab reproduction. The cabinet is constructed from 3/4" baltic birch, features dovetail joinery, is covered in 1990 Rose Morris "fawn" reissue vinhyde, and brown fretcloth. No plastic corner protectors are installed, as these cabinets have "perfect" vinyl corners, just as the original fawn AC-30s from the early sixties.Your JMI era chassis will slide into these cabinets perfectly. Three Vox logo handles and three brass vents are also included. Slider boards are not included, but available at option.

These combo cabinets will not fit any era of Vox chassis but JMI (1960 through 1967). VSL, Dallas Arbiter, Rose Morris, and Korg era chassis will not fit and there is no way to modify either the chassis or cabinet that would allow the chassis to fit. North Coast Music does not manufacture combo or head cabs for VSL, Dallas Arbiter, Rose Morris, or Korg era chassis.

How do I know if I have a JMI chassis?  It will say "a JMI poroduct" on the control panel.


Reissue fawn vinhyde as
installed on the NCM-126F
NCM-126FTB - AC-30 Combo Cab in Reissue Fawn Vinhyde - Brown grill, three brass vents, correct Vox nameplate, three NCM-103 Vox logo handles, no speakers. For JMI chassis only, these do not fit any other era Vox AC-30 chassis. No electronics are included or offered by North Coast Music for these cabinets. You must supply the electronics. We do not offer cabs for any other Vox chassis than JMI, even by special order. 27.25" x 20.25" x 10.375".

All North Coast Music reproduction cabinets are hand made by order. Please allow 3 weeks for delivery from time of order. No other custom color vinyls are offered.




NCM-126FTB - AC-30 Combo Cab in Reissue Fawn Vinhyde with Top Boost Hole in Upper Back - Brown grill, three brass vents, correct Vox nameplate, three NCM-103 Vox logo handles, no speakers, and hole in upper back for a top boost accessory installation. For JMI chassis only, these do not fit any other era Vox AC-30 chassis. No electronics are included or offered by North Coast Music for these cabinets. You must supply the electronics. We do not offer cabs for any other Vox chassis than JMI, even by special order. 27.25" x 20.25" x 10.375".

All North Coast Music reproduction cabinets are hand made by order. Please allow 3 weeks for delivery from time of order. No other custom color vinyls are offered..

Price: $579.00 USD each
Continental US Shipping: $30 USD each
International Shipping: Click here
Part # NCM-126FTB


Order Quantity: Add To Order

Having trouble with the shopping cart? Click here



Genuine VOX AC-30 Vinyl Cover
NCM-039

NCM-039 - Genuine VOX Vinyl Cover for all:

VOX AC30CC2/2X, AC30H2, vintage AC-30 models, and

AC30TB or TBX
AC-30 Speaker Cabs
AD120VT
AD120VTX
VT100
AD100VT
AC50CP2
V212BN/BNX*

VOX has discontinued all their covers. The NCM-039 AC-30 combo cover is now sold out at North Coast Music, sorry.
AC-30 Rigid Chrome Stand
NCM-055



Only North Coast Music NCM-055 AC-30 rigid stands have the four vertical pins on the horizontal amp support cross tubes, as the Beatles also had on their stands. If you shop for this stand elsewhere, the stand you purchase will not have these pins or be "Beatle correct." Yet another North Coast Music exclusive!
AC-30/AC-30TBX/AC-30CC2 or 2X/
AC30C2 or 2X, AC30BM, AC30H2, AD120VT/AD120VTX/
AD100VT/VT100/AC50CP2 Rigid Chrome Stand - Rigid stand as seen used by The Beatles in early 1960's, manufactured exclusively by North Coast Music. Use this stand for a Vox AD120VT or VTX amp, JMI AC-30 combo, AC-30TB or TBX, the new AC-30CC2 or 2X, AD100VT, VT100, or AC-30 extension cabinet. Amplifier sits on top of stand.

The four "Beatle correct" vertical guide piins on this stand help to properly align the amp when placing it upon the top of the stand, but do not actually touch the front or rear of the amp when sitting on the stand. The feet on the amp center the amp on the stand, not the bent pins.

Many have asked about using this stand with other amps than Vox. For those people, here are the dimensions of the amp tray: The absolute total maximum width of the amp tray is 27.6". The distance between the two parallel amp support tubes is 8.625", or 10.375" to the outside of the same tubes. The stand raises the amp about 15" above the floor.

Price: $199.00 USD each
Continental US Shipping: $20.00 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-055
Order Quantity: Add To Order

Having trouble with the shopping cart? Click here





NCM-090




AC-30/Viscount Chrome Plated Tubular Steel Swivel Side Stand with Casters- Complete Set (left and right side of amp) - "A" frame chrome side stands for AC-30 combos and AC-30 extension cabinets, built to the exact original contours as 1960s era JMI Vox production  Also a functional replacement for the Vox Viscount amplifier.

Includes two "A" frames, two chrome plated "Vox" logo hand wheels, two cabinet swivel mounting plates, two friction washers, and four casters with nylon mounting inserts. Does not include cabinet mounting screws or cabinet drilling template, but AC-30 replacement cabinets manufactured by North Coast Music after 2/2008 come predrilled for this side stand. Just push a needle from the inside of the cabinet through the vinyl to expose the predrilled screw holes and insert eight 3/4" long #10 flat head screws to install the cabinet mounts.

About 17.5" tall, including casters. 14" wide.

Price: $249.00 USD each
Continental US Shipping: $18.00 USD each
Alaska, Hawaii and International Shipping Quotes: CLICK HERE
Part #: NCM-090
Order Quantity: Add To Order

Having trouble with the shopping cart? Click here




Large Amp Head Cover
AC-30 Road Case



 VOX AC-30, AC-30TBX, AC-30CC2, AC30H2/L, AC50CP2, AC-30 Speaker Enclosure, AD120VT, AD120VTX, VT100, or AD100VT Road Case - Manufactured by North Coast Music. Fully foam lined, featuring four recessed twist latches, recessed handles, three inch swivel casters, and a durable dark solid gray carpeted exterior. The case is constructed entirely from 1/2" 5-ply Superply plywood. The removable caster plate is constructed from 1/2" 8-ply hardwood plywood. Four heavy duty Guitel 3" swivel casters assure easy mobility.

Fits all new and vintage VOX AC-30's. This case does not accomodate amps or cabs on trolleys or with "A" frame side stands.No returns.

Available ONLY in the 48 contiguous United States. No exports, sorry

Price: $259.00 USD each
Continental US Shipping: $40 USD each
Not available is Alaska, Hawaii or outside the 48 contiguous United States
Part # AC30RC

Order Quantity: Add To Order


Having trouble with the shopping cart? Click here








VOX Amplifiers, Guitars, Spares & Effects | Marshall Amp Parts and Accessories
Rickenbacker Guitars, Basses, and Spares | Hofner Guitars, Basses & Spares
Gretsch Guitars and Parts | Jerry Jones Electric Sitars | Lock-It Guitar Straps
Portable Organs | Strings & Tuners | Scratch & Dent | Apparel | Books | Special Orders


Contact Us and FAQs | Why Shop North Coast Music? | Help | The VOX Showroom


North Coast Music
"The American Home of the British Invasion"
 Cudahy WI 53110
We offer online or fax service only
 Fax (414) 483-3344

Click here to contact North Coast Music



URL: /www.northcoastmusic.com

VOX is a registered trademark of VOX Amplification, USA. Gretsch is a registered trademark of FMIC, Rickenbacker and RIC
are registered trademarks of Rickenbacker International Corporation, USA. Hofner is a registered trademark of Hofner, Germany.
© 1996-2010 North Coast Music. All rights reserved.