Home...|.. About Us...|.. Friends...|.. Returns...|.. Contact...
Vox Amp Parts

We are not accepting international orders at this time due to the severe slowdown in the mail caused by the Coronavirus pandemic.

Vox 1x12" AC-15 Combo Amp Cabs by North Coast Music

NCM-058 - AC-15/4 Combo Cabinet
Black Basketweave Vinyl

NCM-057 - AC-15/4 Combo Cabinet, Fawn Vinyl

"Thin Edge" Combo Amp Enclosure for 1961-1965 JMI Vox AC-15 1x12 Amplifiers, Black Vox Basket Weave or Fawn Vinyl - In 1961, Vox updated the designs of their amplifier cabinets. The new amp combo cabinets were quite a departure from the Fender inspired "TV" styling Vox used on their earliest models. The stylish new cabinets were so unique in appearance that a Vox amp was immediately recognizable on any stage.

At the forefront of these new cabinet designs was the "thin edge" AC-15 1x12 combo amp (click on the link to see this amp in the Vox Showroom web site). North Coast Music has recreated this 1961 Vox AC-15 "thin edge" cabinet so you can replace your beat up original cab and restore the look of your old AC-15 amplifier. You can also remove the chassis and speaker from your original AC-15 amp and install it in one of these new cabinets so that you can gig without damaging the original cabinet.

As on the original, the sides, bottom and backs of this reissue cabinet are constructed of 3/8" seven ply baltic birch plywood. The top is 3/4" 13 ply baltic birch with the front edge milled to 3/8" to match the thickness of the sides and bottom. The cabinet joints are internally reinforced with 3/4" thick solid pine gussets, trimmed on a 45 degree angle.

The 3/4" thick baffle board is secured to the cabinet shell with six 8/32 machine screws with lock washers and nuts along with four wood screws. The backs are secured with ten 10-32 oval head brass machine screws threaded into tee nuts mounted in the back strips. All speaker mounting hardware is included.

The cabinet is covered in either Vox black basket weave vinyl or 1990's era Vox fawn vinyl as shown at left. Current reissue brown Vox brown grill with white piping and gold tee-molding accents the grill.

A blank, undrilled slider board is provided to accept your vintage Vox AC-15 chassis. You will need to drill your own chassis mounting holes in the slider board.

Specifications and Dimensions: 20.75" tall, 20.75" wide, and 10.375" deep, less feet and handle. Weight: 24 pounds. All baltic birch plywood construction.

The clearance between the top of the slider board and the inside top of the cabinet is about 5 3/16". The control panel cutout is ~16.5" x ~3 1/16."

This reissue AC-15 combo cab is authorized and licensed by Vox UK.

"Thin Edge" AC-15 Combo Amp Enclosure in BLACK Basket Weave Vinyl for 1961-1965 JMI Vox AC-15 1x12" Combo Amplifiers
Price: $449 USD each
Continental US Shipping: $40
Part #: NCM-058

"Thin Edge" Combo Amp Enclosure in 1990s era reissue FAWN vinyl for 1961-1965 JMI Vox AC-15 1x12" Combo Amplifiers
Price: $499 USD each
Continental US Shipping: $40
Part #: NCM-057

VOX Amplifiers | VOX Covers | VOX Cabinets by North Coast Music
VOX Trolleys | VOX Logos | VOX Spare Parts | Hofner Spares
Lock-It Guitar Straps | Park Amp Spares | Marshall Spares | Closeouts

Contact Us | About Us | The VOX Showroom

Shop My Store on Reverb

North Coast Music
"Who else could it be for Vox parts?
Cudahy WI 53110

We offer online and email service only

URL: /www.northcoastmusic.com

VOX is a registered trademark of VOX Amplification, Milton Keynes UK.
Hofner is a registered trademark of Hofner, Hagenau Germany.
Marshall is a registered trademark of Marshall Amplification plc, Milton Keynes UK
© 1996-2020 North Coast Music. All rights reserved.