Home...|.. About Us...|.. Friends...|.. Returns...|.. Contact...
Vox Amp Parts

The links in this website will redirect you to our Reverb store

All items offered by North Coast Music are sold exclusively though our store at Reverb. Shipping rates for both US domestic and international shipments will be calculated by Reverb as you complete your order. A tracking number will be provided for every shipment, regardless of size.

All international orders are sent fully insured against loss or damage by first class mail using the Reverb Safe Shipping system. Due to the reduced capacity of global postal systems caused by the Covid 19 pandemic, it is normal that items shipped internationally may require 4-8 weeks to arrive.


Replacement Parts for Marshall Amplifiers

NCM-294 - Genuine 11" Marshall Logo (two views)
Genuine Marshall Logo - White Plastic With Mounting Pins - 11" Wide - M-LOGO-00005 - Injection molded from white plastic, this ~11" wide genuine Marshall Logo is installed on 1960A and 1960B 4x12 speaker cabinets, among others. Front and rear views shown at left, sold individually.

How will I know that this is the right logo for my amp? 
The two outside mounting pins (located on the back of the “M” and the final “L” letters) are located about 8 9/16” apart. Compare this to the measurement between the outer logo mounting holes in your amp to confirm this is the correct logo for your application.

Price: $35.00 USD each
US Shipping: $3.49
Part #:
NCM-294

Click here to purchase 11" Marshall logos from the North Coast Music Reverb store




NCM-295 - Genuine 9" Marshall Logo (two views)
Genuine Marshall Logo - White Plastic With Mounting Pins - 9" Wide - - M-LOGO-00004 - Injection molded from white plastic, this ~9" wide genuine Marshall Logo is installed on many Marshall amplifiers and heads. Front and rear views shown above, sold individually.

How will I know that this is the right logo for my amp?
The two outside mounting pins (located on the back of the “M” and the final “L” letters) are located about 7 7/8” apart. Compare this to the measurement between the outer logo mounting holes in your amp to confirm this is the correct logo for your application.

Price: $35.00 USD each
US Shipping: $3.49
Part #:
NCM-295

Click here to purchase 9" Marshall logos from the North Coast Music Reverb store




NCM-296 - Genuine 6" Marshall Logo (two views)
Genuine Marshall Logo - White Plastic With Mounting Pins - 6" Wide - Injection molded from white plastic, this ~6" wide genuine Marshall Logo is installed on many smaller Marshall amplifiers and heads. Front and rear views shown above, but these are sold individually.

How will I know that this is the right logo for my amp? The two outside mounting pins (located on the back of the “M” and the final “L” letters) are located about 4 9/16” apart. Compare this to the measurement between the outer logo mounting holes in your amp to confirm this is the correct logo for your application.

Price: $35.00 USD each
US Shipping: $3.49
Part #:
NCM-296

Click here to purchase 6" Marshall logos from the North Coast Music Reverb store




NCM-289 - Genuine Marshall Front Corners (set of 4)
Genuine Marshall Front Plastic Corners for Heads and Speaker Cabs (set of 4) - M-PACK-00016 - Brass fasteners included.

Price: $10.00 USD for set of four corners
US Shipping: $3.29 USD
Part #: NCM-289

Click here to purchase Marshall front corners from our Reverb store




NCM-290 - Genuine Marshall Angled Corners (set of 2)
Genuine Marshall Front Angled Plastic Corners for 4x12A Speaker Cabs (set of 2) - M-PACK-00024 - For left and right upper front angled corners of Marshall 4x12 enclosures. Brass fasteners included.

Price: $10.00 USD for set of two corners
US Shipping: $3.29 USD each
Part #: NCM-290

Click here to purchase Marshall angled corners from our Reverb store




NCM-288 - Gernuine Marshall Rear Corners (Set of 4)
Genuine Marshall Rear Corners for Heads and Speaker Cabs (set of 4) - M-PACK-00002 - Brass fasteners included.

Price: $10.00 USD for set of four corners
US Shipping: $3.29 USD each
Part #: NCM-288

Click here to purchase Marshall rear corners from our Reverb store




NCM-286 - Genuine Marshall Strap Handle
Genuine Marshall Strap Handle - M-PACK-00031 - Vinyl strap handle reinforced with an internal metal insert. Two metal end caps, two plastic trim caps with the Marshall logo and two mounting screws are included.

Price: $18.99 USD each
US Mail Shipping/Handling $3.29 USD each
Part #: NCM-286

Click here to purchase a Marshall strap handle from our Reverb store





NCM-287 - Genuine Marshall Side Handle
Genuine Marshall Side Handle - Injection molded black plastic handle as used on Marshall 4x12 speaker cabinets and some combo amps. Screws not included.

Price: $22.79 USD each
US Mail Shipping/Handling: $5.00 USD each
Part #: NCM-287

Click here to purchase a Marshall side handle from the North Coast Music Reverb store




NCM-293 - Genuine Marshall Brass Rivers
(sold in a set of 12)
Genuine Marshall Spare Brass Rivets (set of 12) M-PACK-00017 - Used to fasten corners, handles, caster cups and anti-skid trays to Marshall cabinets.

Price: $6.49 USD each
US Shipping/Handling: Free
Part #: NCM-293

Click here to purchase Marshall brass rivets from the North Coast Music Reverb store




NCM-291 - Genuine Marshall Amp Head Feet (sold in a set of 2)
Genuine Marshall Amp Head Feet (Set of 2) M-PACK-00069 - A pair of genuine Marshall vibration isolation feet as used on the bottom of Marshall tube amp heads (see top and bottom views at left). Sold in pairs and includes four mounting screws to fasten the feet to the bottom of the head. Made of injection molded rubber like material.

Dimensions: ~3 1/4" long, ~2" wide, ~13/16 tall
Mounting holes: ~2 5/16" apart.

Price: $15.99 USD each
US Shipping/Handling: $3.29 USD for set of two feet
Part #: NCM-291

Click here to purchase Marshall amp head feet from our Reverb store




NCM-292 - Genuine Marshall Anti Skid Tray

Genuine Marshall Anti-Skid Tray - M-PACK-00068 - Brass fasteners included

Price: $15.00 USD each
US Shipping/Handling: $3.29 USD each
Part #: NCM-292

Click here to purchase Marshall Anti-Skid trays from our Reverb store




NCM-297 - Genuine Marshall Caster Cup
(sold in a set of four)
Genuine Marshall Caster Cup - Set of Four - M-PACK-00003 - Brass fasteners included

Price: $16.00 USD each
US Shipping/Handling: $3.29 USD each
Part #: NCM-297

Click here to purchase Marshall caster cups from our Reverb store




NCM-298 - Genuine Marshall Jack Socket Plate
(front and rear views, sold individually)
Genuine Marshall Jack Socket Plate - Mounts 1/4" input jack to the rear of Marshall speaker cabinets. Black injection molded plastic, ~3.75" diameter, ~2" deep. requires ~2" mounting hole. Four fasteners included.

Price: $10.00 USD each, sold individually
US Shipping/Handling: $3.29 USD each
Part #: NCM-298

Click here to purchase Marshall jack sockets from our Reverb store




NCM-157
Brass Vent - Finally, a quality replacement brass vent! North Coast has invested the money and time to have an accurate stamping die made so that your early Marshall and Vox amps can look as they did when new. Made in the USA by North Coast Music. Size: ~ 4 3/4" x ~ 9/16."

Price: $13.49 USD each
US Mail Shipping/Handling: Free
Part #: NCM-157

Click here to purchase brass vents from our Reverb store






VOX Amplifiers | VOX Covers | VOX Cabinets by North Coast Music
VOX Trolleys | VOX Spare Parts | Hofner Spares
Lock-It Guitar Straps | Park Amp Spares | Marshall Spares | Closeouts



Contact Us | About Us | The VOX Showroom


Shop My Store on Reverb


North Coast Music
"Who else could it be for Vox parts?"
Cudahy WI 53110
We offer online and email service only



URL: /www.northcoastmusic.com

VOX is a registered trademark of VOX Amplification, Milton Keynes UK.
Hofner is a registered trademark of Hofner, Hagenau Germany.
Marshall is a registered trademark of Marshall Amplification plc, Milton Keynes UK
© 1996-2021 North Coast Music. All rights reserved.