Vox AC-100 Mk I "Thin Edge" Head Enclosure
AC-100 Bass Enclosure (or Vox T.100)

Knowing that they had no amplifiers that could compete with the power of the 80 watt Fender Showman, Vox started the development of 50 watt and 100 watt heads in 1963. The intent was to create amplifier heads that were loud yet simple and inexpensive to build. There would be just one channel and nothing more than volume, treble and bass controls. This resulted in the introduction of the Vox "AC-50 Mk I" and "AC-100 Mk I" amplifier heads.

One of the earliest adopters of the AC-100 Mk I head was Paul McCartney. McCartney took delivery of his in December 1963. His new amp head would accompany the Beatles to America in 1964 and was seen in the movie "A Hard Day's Night."

The cabinet for the AC-100 Mk I amp head was constructed of 3/8" plywood. As a result, many refer to this model as the "thin edge" AC-100 amp head.

Paul McCartney was also supplied a new speaker cabinet to accommodate the increased power of the new AC-100 head. At first, the Vox T.60 speaker cabinet, equipped with one 15" speaker and one 12" speaker, seemed to be a candidate to pair with the AC-100 Mk I head. However, the limited 50 watt power handling capacity of the T.60 cabinet proved a problem. Vox solved this by modifying the T.60 baffle to accommodate a pair of fifty watt 15" speakers while preserving the dimensions of the original T.60 speaker cabinet. While Vox officially called the new 100 watt cabinet the "AC-100 Bass Enclosure," Vox enthusiasts often refer to it as the "T.100."






Reissue Vox AC-100 Bass (T.100) Speaker Enclosure, Less Speakers - The AC-100 Bass (T.100) speaker enclosure is now manufactured exclusively by North Coast Music and authorized and licensed by Vox Amplification, UK. The sealed, closed back enclosure includes speaker cutouts for 2-15" speakers, speaker mounting hardware, 3/4" baltic birch construction, half lap joinery, bolted baffle, basket weave vinyl, one pin corners, a Vox name plate and a three pin Switchraft male XLR speaker jack with a 20" twin lead wire lead. The cable needed to connect your speaker cabinet to your amp head is not included but available by clicking here. Microphone cables do not work between Vox heads and cabs.

36" x 19" x 11.75". About 70 pounds less speakers. Too large for the mail, Fed Ex shipment. In stock for immediate shipment.

Price: $439.00 USD each
Continental US Fed Ex Shipping and overboxing: $65 USD each
International Shipping: Click here
Part #: VAP-043
Select your grill color here:
Brown Vox diamond grill
Black Vox diamond grill
Order Quantity: Add To Order

Having trouble with the shopping cart? Click here



Reissue Vox AC-100 Bass (T.100) Speaker Enclosure, With Two 15" Speakers - Same as above but includes two 15" 400 watt RMS Eminence Delta 15A speakers with 56 ounce magnets and 2.5" voice coils. Total RMS power handling of 500 watts.

The cable needed to connect your speaker cabinet to your amp head is not included but available by clicking here. Microphone cables do not work between Vox heads and cabs.

36" x 19" x 11.75". About 90 pounds. Too large for the mail, Fed Ex shipment. In stock for immediate shipment.

Price: $639.99 USD each
Continental US Shipping and overboxing: $79 USD each
International Shipping: Click here
Part #: VAP-043S

Select your desired impedance from the two choices below. An 8 ohm cab is not an option, sorry.

16 ohms for vintage Vox tube amps
4 ohms for modern bass amps
Select your grill color here:
Brown Vox diamond grill
Black Vox diamond grill

Order Quantity: Add To Order

Having trouble with the shopping cart? Click here




Three 3/4" holes for AC and speaker jacks are provided in the back panel of the AC-100 Mk I amp head cabinet. The vinyl covers these holes. Use a knife blade to expose those you wish to use.

Reissue Vox AC-100 Mk I "Thin Edge" Head Cabinet - An accurate recreation of the AC-100 Mk I amplifier head cabinet (no electronics included) as used by Paul McCartney in 1964. Baltic birch cabinet with basket weave pattern vinyl, no plastic corners, Vox logo, and a VAP-074 handle. No amplifier chassis or vent grill is included. Authorized and licensed by Vox Amplification, Milton Keynes, UK.

Also available at option is the aluminum vent grill used on the inside top and bottom of the cabinet.

Outside dimensions: 19w" x 7t" x 11.25d". Inside dimensions: 17.2w" x 5.4t" x 9d". This cabinet is small enough that it may be shipped internationally by mail.

Price: $299.99 USD each
Continental US Shipping: $28.00 USD each
International Shipping: Click here
Part #: VAP-051
Select your grill color here:
Brown Vox diamond grill
Black Vox diamond grill
Order Quantity: Add To Order

Having trouble with the shopping cart? Click here









VOX Name Plates | Cabinet and Chassis Hardware | Vox Grill Cloth
Vinyl, Pipings and Moldings | Trolleys and Stands | Foot Switches
Vox Cabinets by North Coast Music | Covers | Replacement Speakers
Road Cases | Schematics | Vox Organ Parts and Stands | Catalog Reprints



Contact Us and FAQs | The VOX Showroom



North Coast Music
"The American Home of the British Invasion"
Cudahy WI 53110



URL: /www.voxampparts.com

VOX is a registered trademark of VOX Amplification, UK.

© 1996-2017 North Coast Music. All rights reserved.